19AMI vertical sliding mast elevator

The low-cost solution for overhead work and maintenance applications

Thanks to the AccessMaster® vertical traversing lifts, this lift can afford to reach a whole new level in value and performance.

The AM series features five different models with platform heights ranging from 20 ft (6 m) to 41 ft (12.50 m). In addition, a 5.8 m (19 ft) model is available that does not require outriggers even when it reaches its maximum height. It can be used for industrial and maintenance purposes or even institutional and recreational applications. Its platform has a capacity of 159 kg (350 lb), an optimal working space.

Thanks to its anodized aluminum mast, greater stability and a lower degree of deflection and sway are achieved. The system is mast-guided, so no lubrication is required throughout the life of the machine.

Ease of operation and maneuverability

The mobile vertical lifts JLG® allow you to keep working for longer, whether the work is done in factories, retail centers, airports or public buildings. Thanks to a reliable direct electric drive system, it delivers power while maintenance-free, long-cycle batteries conserve charge. It incorporates an automatic charger, which has a recharge capacity of five hours. Three platform options with quick-change, one-minute mounting brackets allow for efficient maintenance. In addition, it features the most rigid anodized aluminum mast in the industry.

The use of this lift leads to increased ease of operation and maneuverability. You can immediately get to the task at hand with the unique Point & Go® joystick control. It can be propelled and steered, as well as raised and lowered at variable up and down speeds. They handle everything from electrical work and hoisting signs to general maintenance services. A large turning radius of zero allows you to maneuver your way into tight areas.

Accessibility and versatility

Thanks to the Toucan® vertical mast lift from JLG, you can keep up with the challenge of working at height. You can work on, over or around assembly lines, shelves, pipes or partitions more easily and without interference. Positioning possibilities are increased thanks to a 360-degree rotating mast, up to a lift height of 10 m (33 ft) and over 4.27 m (14 ft) of boom reach. It features a 500 lb (227 kg) capacity and an extended-run electric drive.

Built to take on the challenges of a plant floor

The Toucan series can be relied on to keep your production moving: plant maintenance, retooling and changeovers, warehousing, inspection and refurbishment.

Customization according to the needs of the job

Fully customizable, choose from the standard 26" by 28" (66 cm by 71 cm) gull-wing access platform or an optional 22" by 22" (56 cm by 56 cm) narrow platform if you need to work between ceiling panels. For added platform space on the AMI and MVL models, the 66 extension platform can be exchanged for a 122 cm (26 x 48 in.) platform, gaining 53 cm (21 in.) of working space.

Should you need to work over a seat, machinery or even the stairwell, a carrier fork extension kit with side entry is available, which features a 66 cm (26 x 26 in.) by 66 cm (26 x 26 in.) platform, allowing for easier access and egress.

Safety Lockout

A programmable four-digit safety lock can be added to provide additional security when the lift is unattended.

Tube carrier

Use the tube carrier to move tubes vertically off the platform floor so there is no risk of breaking fragile fluorescent tubes. This way it is not possible for them to roll or roll under your feet.

Fork Carrier Extension Kit

Available for AM models from 6.10 m to 12.50 m (20 ft. to 41 ft.), the fork carrier extension kit comes in four parts that can be easily assembled.

Tool tray

You don't have to bend over and over to pick up tools from the floor, but you can add the addition of the factory aluminum tool tray. This is installed inside the top rail, with which you can store a variety of tools.