Electric telescopic platform Magni ETBJ26RT
Magni 26m ETBJ26RT electric telescopic platform
The lithium-electric telescopic platform Magni ETBJ26RT has a working height of 26.70 meters and a maximum load capacity of 454 kg.
26 m
454 kg
- Brand
- MAGNI
- Model
- ETBJ26RT
General features
- Weight
- 16800 KG
- Lift height (m)
- 26 meters
- Load capacity (kg)
- 454 KG
- Battery capacity
- 80V/420Ah
- Platform height
- 2.87 meters
- Battery type
- Lithium Battery
- Transmission
- Hydrostatic
- Wheelbase
- 2.8 mm
- Max. no. of occupants
- 3
- Platform length
- 10.83 meters
- Platform width
- 2.5 meters
- Ground clearance
- 410 mm
- Turning radius (inside)
- 1.87 meters
- Turning radius (outside)
- 3.22 meters
- Drive motors
- 54VAC/18kW
- Travel speed (closed configuration)
- 6 km/h
- Travel speed (working configuration)
- 1.1 km/h
- Max. working slope
- X -5° / Y -5°
- Tires
- 385/45-28
- Max. basket height
- 24.7 meters
- Max. lift capacity (stored)
- 0.3
- Max. wind speed
- 12.50 m/s
- Turret rotation
- 360° (continued)
- Type of jib
- Telescopic
- Jib length
- 3.98 meters
- Vertical boom rotation
- 130°
- Basket width
- 0.91 meters
- Basket length
- 1.44 meters
- Basket rotation
- 180°
- Tail swing
- 1.61 meters
- Hydraulic tank capacity
- 165 L
- Platform length (Transport)
- 7.95 meters
- Platform width (Transport)
- 2.5 meters
- Battery charger type
- Single-phase and three-phase 380 V and 220 V
- Motorization
- Electric
The Magni ETBJ26RT lithium electric telehandler is the perfect solution for a wide range of indoor applications on sensitive turf or sensitive paved surfaces, such as shopping malls, theaters, airports, stadiums..
The electric platforms from Magni are characterized by higher productivity and longer uptime thanks to long-life lithium batteries.
The design of this equipment means that they require less scheduled maintenance, produce no emissions and can operate in quieter work areas. In addition, they offer unmatched lifting performance, meeting the growing market demand for a combination of reach and height.
This articulated platform has a low center of gravity to provide perfect overall stability for the entire machine.
The tilting control panel is located at a height that facilitates maneuvering from the ground and allows the platform to move on conveyors in complete safety.
ETBJ26RT lithium-electric telescopic platform features
- Four wheel drive and steering
- Oscillating front axle for greater stability on all types of terrain
- Differential lock
- Power socket on the platform
- Designed for driving in wind speeds of up to 12.5 m/s
- Integrated diagnostic display with CAN-BUS technology
- A large number of components in common throughout the range
- Anti-marking tires
Access to the basket is really easy as it has two sliding bars, designed for easy entry and exit even with safety equipment.
The platform is also fitted with safety bars equipped with pressure sensors which, in the event of a collision, lock the machine immediately.
Among the safety devices installed, we can find the joystick and the dead man's switch pedal, as well as four anchorage points for the safety harness, which represent additional safety measures for the operator while working with the equipment.
Standard equipment
- 360° rotation
- Four-wheel drive
- CAN bus
- Oscillating axle
- Wide opening for easy maintenance
- Horn
- Hour meter
- Proportional controls
- Intermittent lamp
- Anti-fingerprint tires
- Electric safety pump
- Emergency stop button
- Motion alarm sensors
- Emergency lowering system
- On-board diagnostic system
- Maximum allowable displacement at maximum height
- Hydraulic platform rotation
- 4 steering wheels