- Motor brand
- Perkins 1106A-70TAG3
- Motor Power (KW)
- 178.66 / 160.77
- 3400 mm
- 1250 mm
- 1770 mm
- 2088 KG
- Alternator brand
- Mecc Alte ECO38-1S/4
The GSW200P generator set of PRAMAC is equipped with:
The base frame is made of steel profile complete with adequately dimensioned anti-vibration supports and welded support legs.
The plastic fuel tank is equipped with a filler neck, an air inlet through a ventilation pipe and a low fuel level sensor. In addition, thanks to the oil drainage pipe with cap, oil drainage is made easier
The body is soundproof and consists of modular panels, covered with galvanized steel with anti-corrosion treatment and adverse conditions, duly fixed and sealed, to achieve a completely waterproof receptacle.
It has easy access to the generator set for maintenance purposes thanks to side access doors fixed by stainless steel hinges and perforated galvanized steel interior. It also includes removable panels with screw holes protected by a plastic cover. In addition, the control panel protection door is provided with a suitable window and lock.
It consists of a suitably protected and soundproofed side air inlet opening and an exhaust air outlet in the roof, rain gutter protected by a suitable grille.
Complete soundproofing is achieved thanks to the sound-absorbing material with acoustic insulation and the efficient residential muffler placed inside the body.
It has a robust mechanical structure, which allows easy access to connections and components during checks and maintenance work if necessary.
Thanks to the voltage regulation with DSR that controls the voltage range, any possible problems caused by unqualified personnel are avoided. The voltage accuracy is ± 1% in static condition with any power factor and with speed variation between 5% and 30% with reference to nominal speed.
It has a wiring / excitation system consisting of a 2/3 wound stator. This is intended to eliminate the triple harmonics (3rd, 9th, 15th ...) in the voltage wave and to avoid problems in the supply of non-linear loads. The winding has a 2/3 design that avoids excessive neutral currents, which have been present in larger windings.
MAUX (standard): The MAUX MeccAlte auxiliary winding can withstand an overload of 300% of the rated current (maintaining the short-circuit current) for 20 seconds. This meets the requirements of motor starting.
The insulation is class H standard and the impregnation is done with premium epoxy resins bonded by immersion and dripping. High voltage parts are vacuum impregnated, so the insulation level is always very good.
The manual control panel is group mounted and is complete with:
Protections with shutdown: